This article will introduce the operation steps and precautions of fiber laser cutting machine.

Operation steps

Pre-startup inspection: Before starting the machine, first check whether the various components of the fiber laser cutting machine are installed correctly and intact. In particular, key parts such as the focusing lens and cutting nozzle must be kept clean and intact. Startup sequence: First turn on the power switch, then start the control system, and finally turn on the cooling system and gas source. Be careful to ensure that the purity and pressure of the gas source meet the equipment requirements. Calibration: Before starting the cutting operation, the laser cutting machine needs to be calibrated. Calibration includes adjusting the focus, cutting head angle and height to ensure the accuracy and effect of the cutting. Trial cutting: Before performing formal cutting, it is recommended to perform a trial cutting operation. Trial cutting can check the operating status of the equipment, determine cutting parameters, and verify cutting effects. Formal cutting: After the trial cutting is successful, the formal cutting operation can be started. The operator needs to set the corresponding control parameters such as laser power, cutting speed, gas pressure, etc. according to the required cutting shape and size. Shutdown sequence: After completing the cutting operation, you need to shut down the laser first, then shut down the control system and gas source. Finally, turn off the power switch.

Precautions

Safety protection: When performing fiber laser cutting operations, operators must wear appropriate safety protection equipment, such as protective glasses, gloves, etc., to prevent laser radiation and high temperature burns. Operation training: Operators must undergo professional operation training, be familiar with the various functions and operating procedures of the equipment, and obtain the corresponding operation qualification certificate before they can take up their posts. Avoid collision with hard objects: The optical system and high-precision components in the laser cutting machine require special protection. Avoid hard objects from colliding with optical components such as focusing lenses and reflectors to avoid affecting the cutting effect and damaging the equipment. Keep the equipment clean: Regularly clean the dust and debris on the surface and internal components of the equipment, especially the key parts such as the focusing lens and cutting nozzle to keep them clean and intact. Follow the operating procedures: When performing laser cutting operations, you must strictly follow the operating procedures and must not change the operating steps or adjust the equipment parameters without permission. If you have any questions or encounter problems, please contact professionals in time for processing. Avoid overloading: Avoid overloading the laser cutting machine to avoid overheating or damage to the equipment. At the same time, pay attention to avoid excessive cutting to avoid equipment damage and safety hazards. Regular maintenance: Regularly maintain and service the laser cutting machine, including replacing wear parts, checking the transmission system, cleaning the cooling system, etc., to ensure the normal operation of the equipment and extend its service life.

The operating steps and precautions of the fiber laser cutting machine are important links to ensure the normal operation of the equipment and the safety of the operator. The operator must strictly abide by the corresponding operating procedures and precautions to ensure production safety and stable quality. If you have any questions or encounter problems, please contact professionals in time for processing.