Maintenance and common troubleshooting of fiber laser cutting machine

Maintenance

Keep the equipment clean: Clean the surface and internal parts of the equipment regularly, especially key parts such as focusing lens and cutting nozzle. Avoid the influence of dust and debris on the performance of the equipment. Check gas and power supply: Fiber laser cutting machine needs to use protective gas and electricity. Check whether the type, purity and pressure of gas meet the requirements regularly. Also check whether the power supply is stable and meets the requirements of the equipment. Transmission system maintenance: The transmission system is an important part of the fiber laser cutting machine. It is necessary to check the tightness and wear of the transmission belt regularly and replace the damaged transmission belt in time. Optical system calibration: The accuracy of optical components such as focusing lens and reflector directly affects the cutting effect of the equipment. The optical system needs to be calibrated regularly to ensure its accuracy. Software update: The control system software is the brain and soul of the laser cutting machine and needs to be updated and upgraded regularly to ensure its stability and functionality.

Common troubleshooting

The equipment cannot start: Check whether the power supply is connected properly and whether the fuse of the control system is blown. If the problem persists, please contact the equipment manufacturer or professional maintenance personnel for inspection and repair. Abnormal cutting accuracy of the equipment: Check whether the optical components such as the focusing lens and reflector are clean, loose or damaged. Also check whether the control system software is operating normally and whether it needs to be upgraded or repaired. Abnormal cutting speed of the equipment: Check whether the transmission system is operating normally and whether the transmission belt is loose or worn. Also check whether the power of the laser is stable and whether the parameters of the laser need to be adjusted. The cutting section of the equipment is not smooth: Check whether the focal length of the focusing lens is correct, and also check whether the angle of the cutting head is correct and whether the position of the cutting head needs to be adjusted. Failure of the equipment control system: Check whether the circuit board and sensor components of the control system are operating normally and whether there is damage or aging. If the problem persists, please contact the equipment manufacturer or professional maintenance personnel for inspection and repair.

Maintenance and common troubleshooting of fiber laser cutting machines are very important tasks. Only by doing these things well can the normal operation of the equipment and the good cutting effect be guaranteed. During use, it is also necessary to strictly follow the operating procedures to ensure production safety. If you have any questions or encounter problems, please contact the equipment manufacturer or professional maintenance personnel in time for processing.